This is a B-grade complete 15.2" display including LCD, lid, bezel, hinges and LVDS cable suitable for 550MHz & 667MHz VGA (Onyx M8407) models of Titanium PowerBook G4. It has a resolution of 1152x768.
This display cannot be used on 400MHz or 500MHz models of Titanium PowerBook since the display has an embedded magnet which causes the PowerBook to sleep when the lid is closed and this is in a different position these models. Although this display can be used on later DVI models including the DVI version of the 667MHz model, the resolution is lower than the 1280x854 resolution of their original screens.
If you are unsure which display you need then use the excellent eBay guide.
This is an A-grade unit which means that although used, it is in very good condition for it's type.

Please note that fitting this display does require the logic board to be partially removed to allow the LVDS cable connector to be passed through the aperture in the reart casing. This will separate the processor from it's heat sink and so thermal paste should be used when re-assembling to ensure a good thermal contact and thus prevent overheating. You will also require Torx drivers which, along with the thermal paste, are available from the Tools section.

This is a tested, working used part from a recycled PowerBook. Cosmetic condition may vary."